The Milo journal: short, practical write-ups on hardware, firmware and shipping connected products, from an engineering studio in Bar, Montenegro.

JournalNotes from the bench

Engineering notes.

Short, practical write-ups on hardware, firmware and shipping products — published a few times a week from the bench in Bar.

46 posts

Writing hardware product requirements engineers can use

Vague hardware product requirements cost months later. How to write measurable, testable requirements for a connected device before design starts.
Process 6 min

Snap-fit design for small electronics enclosures

A practical guide to snap-fit design for small electronics enclosures: sizing cantilever hooks, picking resins and tooling snaps cheaply.
Design 7 min

End-of-line testing for your first production batch

What end-of-line testing should check on a first production batch of a connected device: fixtures, flashing, sleep current, radio and logs.
Testing 7 min

MQTT topic design for a growing device fleet

MQTT topic design decides routing, permissions and how painful firmware changes get. The tree we use for connected device fleets, and why.
Software 7 min

PCB antenna placement for small connected devices

Getting PCB antenna placement right matters more than the radio chip: edge position, keep-out, matching networks and tuning inside the real enclosure.
Hardware 7 min

Firmware watchdog design that recovers devices in the field

How to design a firmware watchdog that checks real progress, survives sleep modes, records why it fired and keeps OTA updates safe.
Firmware 7 min

What a hardware project audit checks before a handover

What a hardware project audit should check before a new team takes over: design files, BOM risk, firmware builds, signing keys and test evidence.
Process 6 min

IP67 enclosure design: seals, vents and leak testing

IP67 enclosure design comes down to gland geometry, stiff lids, venting and early leak tests. Here is what we check before a sealed device goes to a lab.
Design 7 min
Load more — 14 older posts