The Milo journal: short, practical write-ups on hardware, firmware and shipping connected products, from an engineering studio in Bar, Montenegro.

JournalNotes from the bench

Engineering notes.

Short, practical write-ups on hardware, firmware and shipping products — published a few times a week from the bench in Bar.

46 posts

ESD protection design for small connected devices

Practical ESD protection design for small devices: find the entry points, choose and place TVS diodes, and make firmware recover before the lab.
Hardware 6 min

Firmware crash logs that make field failures debuggable

How we capture firmware crash logs on Cortex-M and ESP32 devices: what to record, where to keep it across a reset, and how to get it home.
Firmware 7 min

EVT, DVT and PVT: build stages for small hardware teams

What EVT, DVT and PVT builds are for, how many units each needs and what should gate the next stage on a small hardware product.
Process 6 min

Light pipe design for LED status indicators

Good light pipe design makes status LEDs bright, even and free of crosstalk. Coupling, geometry, materials, tolerances and sealing explained.
Design 7 min

Battery life testing that predicts real field runtime

A practical guide to battery life testing: measure real current, budget charge per event and derate the cell so your runtime claim holds up.
Testing 7 min

Storing IoT time-series data without overbuilding

How to store IoT time-series data in Postgres for a growing fleet: sizing sums, partitioning, schema choices, duplicates and retention.
Software 6 min

USB-C power input design for small devices

Design a USB-C power input that works with every charger and cable: CC resistors, protection, inrush, charger choice and when PD is worth it.
Hardware 6 min

Flash wear levelling for settings and logs in firmware

Flash wear levelling explained for firmware teams: how to store settings and logs so they survive years of writes and sudden power loss.
Firmware 7 min
Load more — 22 older posts